Case Studies

Discover our work in the field.
#3DTakeOver

Great things are done by a series of small things.

business-angle-thumb.jpg

February 11, 2014

From Professional Surveyor

By Sam Billingsley, PLS

Hardware and software purchases are two of the largest expenses, outside of personnel, for surveying professionals. There was a time when a surveyor could purchase a high-quality instrument and expect to use it for a decade or more. When I was first sent out to perform field surveys, I (as the new guy) got the oldest equipment. I remember turning angles with a Wild T2 theodolite that was only two years younger than me! However, those days are no more.

The dramatic advancements in efficiency and the addition of new features and technological integrations have changed the field of surveying forever. With a modern laser scanner I am collecting more points per second than I could in a year of manual surveying. I am a bit of a tech geek so I love all of these advances. However, I cannot ignore the effect that this is having on the business side of my profession.

pro-surv

This ever-increasing rate of advancement and improvement renders hardware and software purchases obsolete faster than ever before. Managing these assets in a way that ensures an achievable return on your investment (ROI) is crucial to maintaining a profitable firm.

I think we can all agree that at some point upgrading hardware and software ceases to be an option. Whether this point comes about because you can no longer afford not to upgrade or because the market demands it depends in large part on how you managed the upgrade last time around.

The goal is similar to playing the stock market. You want to hold on as long as possible to wring the most profit, but not a moment too long or you start giving that money back in lost productivity and missed opportunities. Let’s take a look at some of the variables to consider when new hardware and software purchases are on the table.

Software
Sometimes you don’t get a choice when it comes to software. If your clients demand deliverables in a particular format, you have to have the application that authors or converts to said format. However, those changes seem to occur far less frequently than the yearly updates we see in the software world. So, let’s talk about when you do have a choice.

For most major software platforms it is less expensive to stay on a maintenance package and receive automatic upgrades than to purchase them outright. This may not be the case if the software is used to produce work product and not the final deliverable, as you can typically run on older versions when work is for internal use only.

If what you’re working on is the final deliverable, it comes down to features and interoperability. Will the new feature(s) increase your profitability enough to justify the expense? Perhaps it will on one type of project but not in the aggregate. In that case you may be better off leasing the newest version for that project but waiting to upgrade the shop as a whole until next year.

Most manufacturers offer leases ranging from one week to three months long. This lease can be billed directly to a project, and it is also a good way to gauge the usefulness of a new software application prior to the purchase of a full license.

Another concern is interoperability. None of us works in a vacuum. We have a collection of hardware of varying ages from various manufacturers and processing software in the same condition. Our success is predicated on all of it continuing to talk to one another.

The place I trip up the most is in firmware upgrades to hardware. Quite often, this will have a trickle-down effect on my software. Be sure to run any considered changes through your entire workflow—field to finish—before signing on the dotted line.

Speaking of working in a vacuum, it’s a good idea to talk to your biggest clients, subcontractors, and suppliers, as well. Are they upgrading? Will their decision(s) cause a problem in your established workflow?

My last software consideration has to do with the skill set of your personnel. When it comes to survey data, the point cloud has opened up more applications to us than any one person could possibly master. The best way to secure an ROI on a piece of software is to use it to its fullest extent. The time and costs associated with training your personnel to master an application have to be factored into the cost.

Given the depth and complexity of some of these applications, specialists are popping up who just concentrate on what they do really well, be it Revit or ArcGIS or 3D Studio Max. Developing a network of these specialists can be a great way to have the best when you need it without trying to maintain tens of thousands of dollars in software that you barely know how to use.

pro-surv2

Hardware

While total stations and GPS units typically have a lifespan of marketability that’s more than five years, I would argue that the purchaser of a new top-of-the-line terrestrial laser scanner (Leica P20, Z+F 5010C, Faro Focus X330, etc.) can expect two to three years of billable use before it is superseded by a new unit that renders it unmarketable. That doesn’t mean that it will stop working, just that you are going to have a hard time winning a project when you are basing your field costs on scanning at 50,000 points per second while your competitor is doing so at 1 million points per second.

The Apple pricing model seems to have been adopted by most of the manufacturers, so that when a new model is released it is at the same price as the previous “best” model with additional features and improvements, making it a “better” value. Added competition has reduced the prices a bit in the last two to three years, but they haven’t moved much over the past decade. For the most part, speed and compatibility are the variables here, but there are many other things to consider.
First of all, can you afford it? Given the two-to-three-year lifespan and current market rates, you are going to need at least 100 billable days per year to get your ROI.

Start by planning an ROI schedule. This is not a schedule based upon “How long will it last?” but “How long will it be marketable?” Timing is everything, so the first thing to look into is the historic release schedule of the manufacturer. While there are no hard dates, it is easy to see if a particular manufacturer typically releases a new piece of hardware every two years, four years, or whenever.

You need to know where you are in that cycle, as that will have a dramatic effect on the length of time available to achieve an ROI. If you are later in the cycle, you may need more than 100 days per year to be in the black. If you need the hardware but don’t have that type of work load, you may be better off using short-term leases or subcontracting the work to a scanning specialist.

If this is a replacement piece, check with the manufacturer or reseller to see if they are accepting trade-ins for new equipment purchases. These are rarely advertised publicly but are generally available if you stay with the same manufacturer for your upgrade.

Alternatively, you can look to the pre-owned market. You can usually find previous-generation hardware available for pennies on the dollar. However, it’s up to you to make sure it’s in good working order, so insist upon a recent calibration certificate or have it serviced by the manufacturer as part of the purchase price.

While we are looking at timelines, consider what you plan to do with the equipment when it is no longer the “latest and greatest.” Reselling it used can help recoup a bit of cash. If you need a tax break, you may do better donating it to an institution (school, law enforcement, etc.) and taking the write-off with a bit of good press.

Alternatively, we are seeing mobile scanning systems being introduced that use off-the-shelf scanners (Leica Pegasus, p3dSystems ProScan). These can be viewed as accessories that extend the usable lifespan of some scanners.

The last variable to consider is your personnel cost. Skill to do comes from doing, and you have to be honest with yourself about the non-billable hours that will be needed in order to train your personnel to effectively use any new system.

Hardware and software investments are a value proposition. The question is, “Who is receiving that value?” As such, it is important to consider any new purchase from your client’s point of view as opposed to the manufacturer’s. A tool may be smaller, lighter, faster, more accurate, etc., but the market rates for the jobs you are going to perform with it are not going to increase because you have to work less to complete them!

Your delivery times may improve. Your out-of-pocket expenses such as hotels and per diem may decrease as your field times do. You consistently get more value per dollar with your ability to perform more work in less time. But, as I said, you will still be paid the same.

The added value comes from being able to complete more projects in a given time period. Don’t forget to consider how you will fill that time in order to set aside enough profit to upgrade when the time comes around again.
Sam Billingsley is a PLS in Tennessee and vice president of business and product development at SmartGeoMetrics (SGM). Sam manages SGM’s office in Nashville and writes the “Confessions of a Hired Gun” blog at www.sparpointgroup.com/. – See more at: http://www.profsurv.com/magazine/article.aspx?i=71498#sthash.wdMb5yeY.dpuf


business-angle-thumb-1.jpg

February 11, 2014

From Professional Surveyor

By Sam Billingsley, PLS

Hardware and software purchases are two of the largest expenses, outside of personnel, for surveying professionals. There was a time when a surveyor could purchase a high-quality instrument and expect to use it for a decade or more. When I was first sent out to perform field surveys, I (as the new guy) got the oldest equipment. I remember turning angles with a Wild T2 theodolite that was only two years younger than me! However, those days are no more.

The dramatic advancements in efficiency and the addition of new features and technological integrations have changed the field of surveying forever. With a modern laser scanner I am collecting more points per second than I could in a year of manual surveying. I am a bit of a tech geek so I love all of these advances. However, I cannot ignore the effect that this is having on the business side of my profession.

pro-surv

This ever-increasing rate of advancement and improvement renders hardware and software purchases obsolete faster than ever before. Managing these assets in a way that ensures an achievable return on your investment (ROI) is crucial to maintaining a profitable firm.

I think we can all agree that at some point upgrading hardware and software ceases to be an option. Whether this point comes about because you can no longer afford not to upgrade or because the market demands it depends in large part on how you managed the upgrade last time around.

The goal is similar to playing the stock market. You want to hold on as long as possible to wring the most profit, but not a moment too long or you start giving that money back in lost productivity and missed opportunities. Let’s take a look at some of the variables to consider when new hardware and software purchases are on the table.

Software
Sometimes you don’t get a choice when it comes to software. If your clients demand deliverables in a particular format, you have to have the application that authors or converts to said format. However, those changes seem to occur far less frequently than the yearly updates we see in the software world. So, let’s talk about when you do have a choice.

For most major software platforms it is less expensive to stay on a maintenance package and receive automatic upgrades than to purchase them outright. This may not be the case if the software is used to produce work product and not the final deliverable, as you can typically run on older versions when work is for internal use only.

If what you’re working on is the final deliverable, it comes down to features and interoperability. Will the new feature(s) increase your profitability enough to justify the expense? Perhaps it will on one type of project but not in the aggregate. In that case you may be better off leasing the newest version for that project but waiting to upgrade the shop as a whole until next year.

Most manufacturers offer leases ranging from one week to three months long. This lease can be billed directly to a project, and it is also a good way to gauge the usefulness of a new software application prior to the purchase of a full license.

Another concern is interoperability. None of us works in a vacuum. We have a collection of hardware of varying ages from various manufacturers and processing software in the same condition. Our success is predicated on all of it continuing to talk to one another.

The place I trip up the most is in firmware upgrades to hardware. Quite often, this will have a trickle-down effect on my software. Be sure to run any considered changes through your entire workflow—field to finish—before signing on the dotted line.

Speaking of working in a vacuum, it’s a good idea to talk to your biggest clients, subcontractors, and suppliers, as well. Are they upgrading? Will their decision(s) cause a problem in your established workflow?

My last software consideration has to do with the skill set of your personnel. When it comes to survey data, the point cloud has opened up more applications to us than any one person could possibly master. The best way to secure an ROI on a piece of software is to use it to its fullest extent. The time and costs associated with training your personnel to master an application have to be factored into the cost.

Given the depth and complexity of some of these applications, specialists are popping up who just concentrate on what they do really well, be it Revit or ArcGIS or 3D Studio Max. Developing a network of these specialists can be a great way to have the best when you need it without trying to maintain tens of thousands of dollars in software that you barely know how to use.

pro-surv2

Hardware

While total stations and GPS units typically have a lifespan of marketability that’s more than five years, I would argue that the purchaser of a new top-of-the-line terrestrial laser scanner (Leica P20, Z+F 5010C, Faro Focus X330, etc.) can expect two to three years of billable use before it is superseded by a new unit that renders it unmarketable. That doesn’t mean that it will stop working, just that you are going to have a hard time winning a project when you are basing your field costs on scanning at 50,000 points per second while your competitor is doing so at 1 million points per second.

The Apple pricing model seems to have been adopted by most of the manufacturers, so that when a new model is released it is at the same price as the previous “best” model with additional features and improvements, making it a “better” value. Added competition has reduced the prices a bit in the last two to three years, but they haven’t moved much over the past decade. For the most part, speed and compatibility are the variables here, but there are many other things to consider.
First of all, can you afford it? Given the two-to-three-year lifespan and current market rates, you are going to need at least 100 billable days per year to get your ROI.

Start by planning an ROI schedule. This is not a schedule based upon “How long will it last?” but “How long will it be marketable?” Timing is everything, so the first thing to look into is the historic release schedule of the manufacturer. While there are no hard dates, it is easy to see if a particular manufacturer typically releases a new piece of hardware every two years, four years, or whenever.

You need to know where you are in that cycle, as that will have a dramatic effect on the length of time available to achieve an ROI. If you are later in the cycle, you may need more than 100 days per year to be in the black. If you need the hardware but don’t have that type of work load, you may be better off using short-term leases or subcontracting the work to a scanning specialist.

If this is a replacement piece, check with the manufacturer or reseller to see if they are accepting trade-ins for new equipment purchases. These are rarely advertised publicly but are generally available if you stay with the same manufacturer for your upgrade.

Alternatively, you can look to the pre-owned market. You can usually find previous-generation hardware available for pennies on the dollar. However, it’s up to you to make sure it’s in good working order, so insist upon a recent calibration certificate or have it serviced by the manufacturer as part of the purchase price.

While we are looking at timelines, consider what you plan to do with the equipment when it is no longer the “latest and greatest.” Reselling it used can help recoup a bit of cash. If you need a tax break, you may do better donating it to an institution (school, law enforcement, etc.) and taking the write-off with a bit of good press.

Alternatively, we are seeing mobile scanning systems being introduced that use off-the-shelf scanners (Leica Pegasus, p3dSystems ProScan). These can be viewed as accessories that extend the usable lifespan of some scanners.

The last variable to consider is your personnel cost. Skill to do comes from doing, and you have to be honest with yourself about the non-billable hours that will be needed in order to train your personnel to effectively use any new system.

Hardware and software investments are a value proposition. The question is, “Who is receiving that value?” As such, it is important to consider any new purchase from your client’s point of view as opposed to the manufacturer’s. A tool may be smaller, lighter, faster, more accurate, etc., but the market rates for the jobs you are going to perform with it are not going to increase because you have to work less to complete them!

Your delivery times may improve. Your out-of-pocket expenses such as hotels and per diem may decrease as your field times do. You consistently get more value per dollar with your ability to perform more work in less time. But, as I said, you will still be paid the same.

The added value comes from being able to complete more projects in a given time period. Don’t forget to consider how you will fill that time in order to set aside enough profit to upgrade when the time comes around again.
Sam Billingsley is a PLS in Tennessee and vice president of business and product development at SmartGeoMetrics (SGM). Sam manages SGM’s office in Nashville and writes the “Confessions of a Hired Gun” blog at www.sparpointgroup.com/. – See more at: http://www.profsurv.com/magazine/article.aspx?i=71498#sthash.wdMb5yeY.dpuf


blog-viametris-1.jpg

August 28, 2013

The iMMS is the perfect system for quickly collecting dimensional and photographic information in interior and close quarter environments. This revolutionary system combines three LiDAR sensors (3 cm accuracy) with a 360° panoramic camera to provide photo-realistic point cloud data in a mobile platform. The result is a system that digitizes an environment as quickly as you can walk through it!

Indoor Mobile Mapping with the Viametris iMMS

The iMMS maintains its position using “SLAM” (Simultaneous Localization and Mapping) technology with it’s forward facing LiDAR sensor. However, the most optimal results are achieved by post processing the data to use geometric similarities in the environment as additional constraints. This is accomplished using Viametris’ PPiMMS Software Suite. PPiMMS is a powerful post-processing software that automatically corrects any drift in from the SLAM processing in order to compute more precise point cloud results. From an initial acquisition, imported from a Viametris iMMS device, the user builds their own project to correct the potential drifts, add some specific constraints, compute the 3D points clouds and finally export these 3D datasets. Installed on the office work station, PPiMMS can also be used as a stand-alone viewer. PPiMMS can also be used to provide users with a “Streetview” type interface that allows them to navigate the panoramic images from the collected data in a familiar interface.

Mobile mapping has clear advantages over traditional static systems due to the decreased field collection times. High costs due to the necessities of accurate localization has traditionally been the stumbling block of mobile mapping. However, Viametris has overcome this issue with their specific LiDAR-based SLAM technologies. By using SLAM for real-time mapping of the environment and geometric similarities in the environment to further enhance the accuracy during post processing, the iMMS is able to operate without GNSS/GPS receivers or an IMU (Inertial Measurement Unit). These facts are reflected in the iMMS’ ability to excel at mapping indoors and in its low retail price compared to traditional mobile mapping systems.

SmartGeoMetrics is the exclusive US distributor of the iMMS providing sales, service, support, and rentals of the iMMS for clients that are not yet ready to purchase.

Contact SmartGeoMetrics today for more information on the iMMS or to schedule a demo.

View a Video of the iMMS in action collecting data at ILMF 2013.

Viametris iMMS


blog-accuracy.jpg

August 28, 2013

One of the most consistent issues that I am asked to opine on early in a project is that of the accuracy of one particular scanhead versus another. Those of us in the industry have known for years that the manufacturers have done an excellent job of stating the accuracy of their instruments in ways that eliminate the average consumers’ ability to perform a direct comparison. After making a concerted effort to understand the issue and somehow correlate it with my own experiences using various makes and models I have come to the conclusion that the manufacturers  are not necessarily being purposefully obtuse. There are some real, academic disagreements with how best to quantify and state the accuracy of a given instrument (although I still think the marketing department has editorial control of the tech sheets!) In case it was not obvious, I am not an Engineer (although I teach many how to scan), or a physicist (although I have seen every episode of the Big Bang Theory), however, neither are a lot of my clients. So, my intention here is to try and explain the variables and come to some conclusions in a way that can be understood by those of us that do not enjoy advanced statistics (my apologies to those who do).

When it comes to a laser scanner there are three basic types of errors that can lead to inaccuracies.

  • Laser Range Error
    • Comprised of two types: Range Error & Linearity Error
  • Range Noise
  • Mechanical Error
    • Comprised of two types: Horizontal Error & Vertical Error

Let’s take a closer look so that we can better understand each of these three types of error.

Laser Range Error: No system is perfect and that includes laser scanners. When scanners are produced they are tested in measuring a target of known reflectivity at various known distances. This is repeated with targets of differing reflectivity producing a range of range values. The error in capturing the correct distance or range from the scanner to those targets is the range error. Comparing this error over multiple measurements (say 5000-15000 measurements) an error function is created and stored in the scanhead. This function is the Range Calibration. The Range Calibration is different for every individual scanner and it may change over time. This error is one that is recomputed when you send a scanner in to be calibrated. A second test (same procedure as before) is performed after the Range Calibration has been completed. The resulting error found in this test is referred to as Linearity Error. The Linearity Error is plotted on a curve centered on zero. A measurement of the offset of that plotted curve from zero is the stated Linearity Error. Think of it as “as good as it can get on a perfectly calculated scanhead”.

Range Noise: Have you ever looked at a point cloud of a flat wall and noticed that as you zoom in on a profile view that the point cloud is not a smooth flat surface but a noisy grouping of points? That is Range Noise. Technically it is the difference between each individual measurement and the mean distance to an object. There are several things that impact Range Noise. First is the distance to the object being scanned, second is the albedo or reflective quality of the object. However, scanning rates also have a large impact on range noise. Essentially the  higher the scan rate the greater the Range Noise. This is where one of those academic issues comes into play. Some prefer a statement of Range Noise as an absolute (people with slower scan rates) while other insist that the Range Noise should be normalized (divide the range noise by the square root of the scan rate). If you are comparing two different instruments it’s important to know which way the Range Noise was calculated.

Mechanical Error: When considering most modern laser scanners they accomplish scanning in a 360° x 2×0° field of view by deflecting the laser via a rotating mirror in the vertical axis and spinning the scanhead around on a horizontal axis. These mechanical devices (mirror & servos) are also subject to error. While these mechanical devices are aiming the laser beam for us the scanner is calculating and recording the angle and bearing of the mirror and the scanhead each time the instruments sends out a laser pulse. In reality there is a difference between the measured angle and the actual angle in both the horizontal and vertical angles. This is referred to as the Angular Error. As this error is in the bearing used to calculate the XYZ position of each point in the point cloud the error increases as the range increases. For this reason it is typically stated as a Radiant value. This allows you to understand how the angular error increases at range. 1 mrad angle means 1mm spacing per meter in distance from the scanhead. For example the Z+F 5010/HDS7000 has an Angular Error of 0.122 mrad. This means that the error is 1.2mm at 10m, 6mm at 50m, and 12mm at 100m. This mechanical error is also recomputed when you send a scanner in to be calibrated. This is done by scanning a known 3D environment. This allows for the calculation of a mean angular error which is used as a correction against angular errors. The point to take from this section is that angular errors have little impact on measurements at close range but they can have a big impact on data scanned at long range.

The root of the problem is that these three types along with the physical properties of lasers make for some rather complicated outcomes while most customers want a simple (single) number as an answer.  Sadly I can’t give it to you. I think that we need to keep seeing all of those confusing figures using whatever each manufacturer considers the gold standard in error calculation to be. The fact is, the level of error is very different if even one variable (range, angle to object, reflective quality of object, etc.) is altered. Many don’t think about the fact that this means there is a variance of accuracy even within one scanworld. But that doesn’t mean that we can’t help add to the overall understanding of the situation.

So, here is my proposal. Why don’t we develop a standard sample grid. An easy chart that like the EPA Mileage Certificate or the Nutritional Pyramid gives us an accurate snapshot of the performance of the instrument? I’m thinking a grid with various distances along one axis and various surfaces along the other showing the actual mean error of the instruments measurement compared to the known measurement. I know it’s not perfect; neither is the EPA’s Mileage Certificate. They calculate highway mileage driving in controlled conditions without considering a lot of real world applications. In other words, I will never get the exact numbers that they post on the sticker, but at least I can see that my Toyota Sequoia will take a lot more gas than my wife’s car. And that is what most customers are looking for; a direct comparison.


blog-accuracy-1.jpg

August 28, 2013

One of the most consistent issues that I am asked to opine on early in a project is that of the accuracy of one particular scanhead versus another. Those of us in the industry have known for years that the manufacturers have done an excellent job of stating the accuracy of their instruments in ways that eliminate the average consumers’ ability to perform a direct comparison. After making a concerted effort to understand the issue and somehow correlate it with my own experiences using various makes and models I have come to the conclusion that the manufacturers  are not necessarily being purposefully obtuse. There are some real, academic disagreements with how best to quantify and state the accuracy of a given instrument (although I still think the marketing department has editorial control of the tech sheets!) In case it was not obvious, I am not an Engineer (although I teach many how to scan), or a physicist (although I have seen every episode of the Big Bang Theory), however, neither are a lot of my clients. So, my intention here is to try and explain the variables and come to some conclusions in a way that can be understood by those of us that do not enjoy advanced statistics (my apologies to those who do).

When it comes to a laser scanner there are three basic types of errors that can lead to inaccuracies.

  • Laser Range Error
    • Comprised of two types: Range Error & Linearity Error
  • Range Noise
  • Mechanical Error
    • Comprised of two types: Horizontal Error & Vertical Error

Let’s take a closer look so that we can better understand each of these three types of error.

Laser Range Error: No system is perfect and that includes laser scanners. When scanners are produced they are tested in measuring a target of known reflectivity at various known distances. This is repeated with targets of differing reflectivity producing a range of range values. The error in capturing the correct distance or range from the scanner to those targets is the range error. Comparing this error over multiple measurements (say 5000-15000 measurements) an error function is created and stored in the scanhead. This function is the Range Calibration. The Range Calibration is different for every individual scanner and it may change over time. This error is one that is recomputed when you send a scanner in to be calibrated. A second test (same procedure as before) is performed after the Range Calibration has been completed. The resulting error found in this test is referred to as Linearity Error. The Linearity Error is plotted on a curve centered on zero. A measurement of the offset of that plotted curve from zero is the stated Linearity Error. Think of it as “as good as it can get on a perfectly calculated scanhead”.

Range Noise: Have you ever looked at a point cloud of a flat wall and noticed that as you zoom in on a profile view that the point cloud is not a smooth flat surface but a noisy grouping of points? That is Range Noise. Technically it is the difference between each individual measurement and the mean distance to an object. There are several things that impact Range Noise. First is the distance to the object being scanned, second is the albedo or reflective quality of the object. However, scanning rates also have a large impact on range noise. Essentially the  higher the scan rate the greater the Range Noise. This is where one of those academic issues comes into play. Some prefer a statement of Range Noise as an absolute (people with slower scan rates) while other insist that the Range Noise should be normalized (divide the range noise by the square root of the scan rate). If you are comparing two different instruments it’s important to know which way the Range Noise was calculated.

Mechanical Error: When considering most modern laser scanners they accomplish scanning in a 360° x 2×0° field of view by deflecting the laser via a rotating mirror in the vertical axis and spinning the scanhead around on a horizontal axis. These mechanical devices (mirror & servos) are also subject to error. While these mechanical devices are aiming the laser beam for us the scanner is calculating and recording the angle and bearing of the mirror and the scanhead each time the instruments sends out a laser pulse. In reality there is a difference between the measured angle and the actual angle in both the horizontal and vertical angles. This is referred to as the Angular Error. As this error is in the bearing used to calculate the XYZ position of each point in the point cloud the error increases as the range increases. For this reason it is typically stated as a Radiant value. This allows you to understand how the angular error increases at range. 1 mrad angle means 1mm spacing per meter in distance from the scanhead. For example the Z+F 5010/HDS7000 has an Angular Error of 0.122 mrad. This means that the error is 1.2mm at 10m, 6mm at 50m, and 12mm at 100m. This mechanical error is also recomputed when you send a scanner in to be calibrated. This is done by scanning a known 3D environment. This allows for the calculation of a mean angular error which is used as a correction against angular errors. The point to take from this section is that angular errors have little impact on measurements at close range but they can have a big impact on data scanned at long range.

The root of the problem is that these three types along with the physical properties of lasers make for some rather complicated outcomes while most customers want a simple (single) number as an answer.  Sadly I can’t give it to you. I think that we need to keep seeing all of those confusing figures using whatever each manufacturer considers the gold standard in error calculation to be. The fact is, the level of error is very different if even one variable (range, angle to object, reflective quality of object, etc.) is altered. Many don’t think about the fact that this means there is a variance of accuracy even within one scanworld. But that doesn’t mean that we can’t help add to the overall understanding of the situation.

So, here is my proposal. Why don’t we develop a standard sample grid. An easy chart that like the EPA Mileage Certificate or the Nutritional Pyramid gives us an accurate snapshot of the performance of the instrument? I’m thinking a grid with various distances along one axis and various surfaces along the other showing the actual mean error of the instruments measurement compared to the known measurement. I know it’s not perfect; neither is the EPA’s Mileage Certificate. They calculate highway mileage driving in controlled conditions without considering a lot of real world applications. In other words, I will never get the exact numbers that they post on the sticker, but at least I can see that my Toyota Sequoia will take a lot more gas than my wife’s car. And that is what most customers are looking for; a direct comparison.